Chrysler 3.9L Index of Articles

How To Test The MAP Sensor (2000-2003 3.9L V6 Dodge Dakota)

How To Test The MAP Sensor (2000-2003 3.9L V6 Dodge Dakota)

In this tutorial I'm gonna' explain how to test the manifold absolute pressure (MAP) sensor with a multimeter and a vacuum pump. All of the test steps are explained in a step-by-step manner. With your test results you'll be able to easily...   read more >>

How To Test The TPS Sensor (2000-2003 3.9L V6 Dodge Dakota)

How To Test The TPS Sensor (2000-2003 3.9L V6 Dodge Dakota)

In this tutorial I'm gonna' explain how to test the throttle position sensor (TPS) on the 2000, 2001, 2002, and 2003 3.9L V6 Dodge Dakota with a multimeter. You'll be able to find out if the throttle position sensor is bad or not. You'll also be...   read more >>

How To Test The MAP Sensor (1992-1996 3.9L Dodge Dakota)

How To Test The MAP Sensor (1992-1996 3.9L Dodge Dakota)

Testing the manifold absolute pressure (MAP) sensor, on the 1992-1996 3.9L Dodge Dakota is not hard at all. In this tutorial I'm gonna' show you how to test it using a vacuum pump and a multimeter. With your test results you'll be able to find...   read more >>

Power Window Circuit Wiring Diagram (1991-996 3.9L Dodge Dakota)

Power Window Circuit Wiring Diagram (1991-996 3.9L Dodge Dakota)

Here you'll find the typical power window circuit wiring diagrams for the 1991, 1992, 1993, 1994, 1995, and 1996 3.9L V6 Dodge Dakota. The circuit wiring diagram includes the following circuits: Left front master window switch, right front...   read more >>

How To Test The Starter Motor (1991-1995 3.9L Dodge Dakota)

How To Test The Starter Motor (1991-1995 3.9L Dodge Dakota)

Testing the starter motor on the 1991-1995 3.9L V6 Dodge Dakota is not hard. In this tutorial I'll explain how to do it so that you can find out if it's bad or not. All the test steps are explained in a step-by-step manner. APPLIES TO: This...   read more >>

How To Test The Blower Motor Switch (1991-1996 3.9L Dodge Dakota)

How To Test The Blower Motor Switch (1991-1996 3.9L Dodge Dakota)

The blower motor switch, on the AC/Heater Control Panel, can be easily tested without having to remove it. In this tutorial I'm gonna' show you how to test it by going thru' the blower resistor assembly's connector (which is easy to access and...   read more >>

How To Test Engine Compression (1993-1999 3.9L Dodge Dakota)

How To Test Engine Compression (1993-1999 3.9L Dodge Dakota)

In this tutorial I'm going to show you how to test the engine compression on the 3.9L V6 engine of the Dodge Dakota and Dodge Durango. I'm also going to explain how to interpret your test results so that you can find out if your engine has an...   read more >>

How To Test The Blower Motor Resistor (1991-1996 3.9L Dodge Dakota)

How To Test The Blower Motor Resistor (1991-1996 3.9L Dodge Dakota)

One of the things that makes testing the blower resistor assembly, on the 1991-1996 3.9L Dodge Dakota, is the fact that it's so easy to get to. The test itself is done with a multimeter and is very easy to do. In this tutorial you'll find it...   read more >>

How To Test For A Blown Head Gasket (1993-1999 3.9L Dodge Dakota)

How To Test For A Blown Head Gasket (1993-1999 3.9L Dodge Dakota)

As you're probably already aware the 3.9L V6 engine, on the 1993-1999 Dodge Dakota and the 1998-1999 Dodge Durango, comes equipped with two head gaskets and this tutorial will help you to find out if they are blown or not. There are four simple...   read more >>

How To Test The Throttle Position Sensor (1992-1996 3.9L Dodge Dakota)

How To Test The Throttle Position Sensor (1992-1996 3.9L Dodge Dakota)

In this tutorial I'm gonna' explain how to test the throttle position sensor (TPS) on the 1992-1996 3.9L V6 Dodge Dakota. With your test results you'll be to conclude that the throttle position sensor (TPS) is bad or not. You'll also be able...   read more >>