Page 3 of 3
Ignition Control Module Connector Pin Out
| Pin | Wire Color | Description |
|---|---|---|
| A | Orange With White Stripe (ORG/WHT) | Ignition Coil 2 (2/5) Control |
| B | Purple (PPL) | Ignition Coil 1 (1/4) Control |
| C | Light Blue (LT BLU) | Ignition Coil 3 (3/6) Control |
| D | Yellow (YEL) | Ground (Low Reference) |
| E | Black (BLK) | Chassis Ground |
| F | Pink (PNK) | Ignition 12 Volts |
Camshaft Position Sensor Connector Pin Out
| Pin | Wire Color | Description |
|---|---|---|
| A | Red (RED) | CMP Signal Output |
| B | Black (BLK) | Sensor Ground Input |
| C | Brown With White Stripe (BRN/WHT) | 5 Volt Input |
NOTE: The above applies only to the 2004 and 2005 3.5L V6 Chevrolet Malibu.
More 3.9L V6 Test Tutorials
You can find a complete list of 3.9L V6 diagnostic test tutorials here: GM 3.9L Index Of Articles.
Here's a list of articles you'll find there:
- How To Test The Engine Compression (2006-2010 3.9L V6 Engine).
- How To Test A Blown Head Gasket (2006-2010 3.9L V6 Engine).
- Ignition System Circuit Wiring Diagram (2006-2009 3.9L Pontiac G6).
- How Often Should I Replace The Spark Plugs (2006-2010 3.9L V6 Engine).
If this info saved the day, buy me a beer!
